Technicians and Mechanics Gloves

As low as £25.00
In stock
SKU
SB01108F

A general purpose glove used by ground staff for maintenance, equipment moving, lashing, driving in all weather conditions

A general purpose glove used by ground staff for maintenance, equipment moving, lashing, driving etc. in all weather conditions with minimal loss of dexterity. A water resistant goat grain leather palm and a rip-stop cotton fabric back make up the outer shell with a nylon knitted cuff. The style is fully lined with a foam backed nylon material. It is also made water proof and breathable by the presence of a Porelle moisture vapour permeable (MVP) membrane.

PALM: 100% top grade WR goat nappa leather
BACK: 65% polyester, 35% cotton ripstop
CUFF: 100% nylon
LINING: 100% 2mm foam backed nylon
INTERLINING: MVP membrane

Usually one hand will be slightly larger than the other, typically the dominant hand (the right hand if you are right handed). Using a tape measure, wrap the tape around the dominant hand at the widest part (between your thumb and index finger) and make a loose fist. Make a note of this measurement and check our sizing guide below.

  • SIZE 6 = XXS (15.2 cms)
  • SIZE 7 = XS (17.8 cms)
  • SIZE 8 = S (20.3 cms)
  • SIZE 9 = M (22.9 cms)
  • SIZE 10 = L (25.4 cms)
  • SIZE 11 = XL (27.9 cms)
Write Your Own Review
You're reviewing:Technicians and Mechanics Gloves
 
Visa Logo
 
 
PayPal Logo
 
Maestro Logo
 
 
Mastercard Logo
 
 
 
Braintree Logo
 
© 2024 Southcombe Gloves Company Number 372391 VAT Number GB 186 2830 43