Extreme Cold Weather Mitten
These mittens are designed to be worn in extreme cold weather zones on operations and training. Leather palm and ripstop fabric back and cuff. Fully waterproof and lined. Can be worn a part of a modular system.
These mittens are designed to be worn in extreme cold weather zones on operations and training. They can be worn either with or without another glove or with or without a removable wool pile fabric lining (available separately). They are designed to provide thermal protection whilst allowing the tactility required to carry out work in extreme cold weather conditions. The presence of the MVP single layer Direct Grip lining and Interlining in one unit provides the wearer with a breathable waterproof barrier which allows the hand to remain dry at all times.
PALM : 100% top grade WR goat nappa leather
BACK : 100% cotton and polyester disruptive camouflage pattern fabric
LINING: MVP Direct Grip 3 layer laminate
Usually one hand will be slightly larger than the other, typically the dominant hand (the right hand if you are right handed). Using a tape measure, wrap the tape around the dominant hand at the widest part (between your thumb and index finger) and make a loose fist. Make a note of this measurement and check our sizing guide below.
- SIZE S = 8" (20.3 cms)
- SIZE M = 9" (22.9 cms)
- SIZE L = 10" (25.4 cms)