Firemaster Non-structural Gauntlet

As low as £60.00
In stock
SKU
SB02452A

A gauntlet cuffed leather glove designed for the hazards faced during non-structural fires, rescues, extrications and site clearances, EN388 certified. 

Designed for the unique hazards faced during non-structural rescues, extrications and site clearances, the Non-Structural gauntlet has our signature ergonomic curved finger design paired with a hard-wearing combination of PYROHIDE and Kevlar®. Over the top of the leather at the roll tip fingers and around the palm and thumb, we have added a FR coated Kevlar® material which provides enhanced abrasion and cut resistance. A PYROHIDE gauntlet cuff with a velro adjustment strap designed to secure over the top of a sleeve completes the exterior. The glove has a revolutionary seamless knitted lining of Kevlar® with glass-fibre offering the highest level of cut resistance currently available on the market as well as active perspiration technology through the Viloft plating on the face of this lining yarn. The glove is certified to EN420 and EN388.

OUTER PALM: 100% PYROHIDE cowhide grain leather
LINING: 100% Kevlar® with glass-fibre
CUFF: 100% 100% PYROHIDE cowhide grain leather
THREAD: 100% cotton

Usually one hand will be slightly larger than the other, typically the dominant hand (the right hand if you are right handed). Using a tape measure, wrap the tape around the dominant hand at the widest part (between your thumb and index finger) and make a loose fist. Make a note of this measurement and check our sizing guide below.

  • SIZE XXS = 6"(15.2 cms)
  • SIZE XS = 7" (17.8 cms)
  • SIZE S = 8" (20.3 cms)
  • SIZE M = 9" (22.9 cms)
  • SIZE L = 10" (25.4 cms)
  • SIZE XL = 11" (27.9 cms)
  • SIZE XXL = 12" (30.5 cms)
More Information
Choose Colour Lime
Write Your Own Review
You're reviewing:Firemaster Non-structural Gauntlet
 
Visa Logo
 
 
PayPal Logo
 
Maestro Logo
 
 
Mastercard Logo
 
 
 
Braintree Logo
 
© 2024 Southcombe Gloves Company Number 372391 VAT Number GB 186 2830 43